metso mobile crushing plant for sale
Basic Info
Model No.: SXSM-035
Product Description
Mobile Crushing Plant has the following six advantages.
1. One of the biggest advantages of mobile crusher is that it can be moved, the combination is flexible, and the applicability is strong.
2. The second biggest advantage of the mobile crusher is that it can crush the material with ultra-high moisture content, there is no requirement for the moisture content of the material, and the material with high viscosity will not be blocked when crushed. Because the mobile crusher is designed without a screen bottom and screen. It can also be produced normally on rainy days.
3. The mobile crusher adopts the upper and lower stages of pulverization. after the material is crushed by the upper rotor, the material is crushed again by the lower rotor. the material forms hammer powder in the cavity and the effect of the powder material. And then unload it directly from the outlet. The discharge particle size of the mobile crusher is also very uniform and can be controlled below 2mm (mm).
4. The mobile crusher adopts the original gap adjustment technology. when the hammer is worn, the position of the hammer is adjusted to reduce the gap between the hammer and the liner. In this way, satisfactory granularity can be obtained.
5. The mobile crusher uses the hydraulic starting shell, a person can open the shell, maintenance or inspection of parts is convenient and fast.
6. The mobile crusher has changed the traditional butter nozzle injection mode to the centralized oil injection mode, which can realize the oil injection without stopping.
Metal crusher is mainly used to realize the decomposition and crushing of large mouth waste metal, and to realize the fine crushing of waste metal, so as to achieve a better benefit prospect in the transportation cost and recovery price of waste metal. This series of equipment is a kind of multi-purpose and high efficiency metal kneading ball equipment produced by our factory. it can be used to achieve good paint removal effect and granulation effect whether it is used in end-of-life cars or waste cans.
In the working principle of the equipment, the metal pulverizer makes use of the basic principle of the hammer strike, under the drive of the high speed and high torque motor, the hammer head on the rotor of the main engine takes turns hitting the material to be broken into the cavity, through the space formed between the liner plate and the hammer head, Tear the debris to be broken into pieces in accordance with the specifications. According to the working condition of the crusher, it can be divided into dry system, wet system and semi-wet system.
Dry system mainly means that the broken material must pass through the air rotary sorting system to separate the metal and non-metal, in addition, the whole system is equipped with dust removal device. Wet system is to spray water at the same time of crushing, and to wash with water at the same time of sorting.
The semi-wet system only carries out a small amount of water spraying when the crushing needs, to prevent dust, and there is no cleaning. As a high quality equipment for scrap metal crushing treatment, metal crusher can greatly improve the disassembly efficiency of waste metal in terms of investment value, and at the same time enhance the purity of waste iron and steel to provide high quality burden for low cost smelting of scrap metallurgy industry.
Metal crusher series products mainly include: easy to pull can grinding, color steel tile crushing, scrap car crushing, paint barrel crushing, iron chip crushing and other series of products can be used for a variety of waste metal recycling crushing processing.
Product Features:
In addition, the whole system is equipped with dust removal device to minimize the harm of dust pollution in the production process. The equipment mainly has the advantages of high output, low energy consumption, high efficiency, uniform discharge and so on. When the equipment is used, the noise is low, there is no pollution, the operation is simple and the maintenance is convenient.
Pre-sale:
(1) selection of equipment type.
(2) Design and manufacture products according to the special requirements of customers.
(3) training of technical personnel for clients.
(4) The company plans the site for the user free of charge, designs the suitable process and the plan.
On sale:
(1) acceptance of the product.
(2) assisting clients in the preparation of construction plans.
After sale:
(1) assign special after-sales service personnel free of charge to guide customers to install and debug.
(2) installation and debugging of equipment.
(3) on-site training of operators.
(4) after the installation of the complete set of equipment, the full-time technical personnel may assist the customer in on-site production until the user is satisfied.
Product Categories : Crusher Machine > Mobile Crushing Plant